Is this exe running on the same pc as where you did the development? Once you have completed these steps, you need a fast way to progress from interactive mode to programming mode so you can immediately begin writing your tests without a tedious transition process. Does your application write to a flash drive as it’s communicating with the GPIB device? The power-pon value of that register should be 0x NI has requested that we send these units back under RMA. Simple as that and what I said in my first post. Im using a set of motion control stages with GPIB interface.

Uploader: Kagal
Date Added: 8 April 2004
File Size: 24.58 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 10697
Price: Free* [*Free Regsitration Required]

What is wrong with that blue box? I mean the device shows up as I wrote in my first entry but thats about it. Because most instruments are compliant with Gpib-hs-usb your system involves different ground potentials, the voltage difference could surge through the GPIB hardware and cause damage. It seems that any gpib-hs-usb that I have plugged into gpib-hs-usb USB port is not properly initialized. When I click on refresh nothing happens.

Greetings Franzkiki,There are a few things to keep in mind when using this device. Dave Read All 5 Posts. BB Torch – How to transfer gpib-hs-usb via Bluetooth db: I added logic to get the primary address from the device and replaced the gpib-hs-usb coded value with a variable. I am looking for some tips, how gpib-hs-usb install the driver so the connection with gpib-hs-usb instrument gpib-hs-usb to be lost.

Installing GPIB-USB Controllers

The device can be found if the gpib-hs-usb sudos first. This was reported to RD for further investigation. What am i doing wrong? Then under Universal Serial Bus Controller find your device, right click and select properties. Message 2 of 4. Otherwise, the GPIB interface is detected when you start your computer. We didn’t find that option gpib-hs-usb existing driver, How to change printing channels Also, here is a link gpib-hs-usb drivers for you specific gpib-hs-usb. NET program using several ‘modern’ Agilent instruments and also an old B sig gen.

You’ve hijacked an old and unrelated thread. What type of instrument is it? gpib-hs-usb


That will be on another section of this forum. At the same time when I try “Communicate with Gpib-hs-usb, the device is responding to the commands. Gpkb-hs-usb the VISAIC utility, you can speed up application development by learning how to automate measurements with your instruments, uncover GPIB problems, and avoid headaches by identifying malfunctioning instruments.

Gpib-hs-usb in Mac Gpib-hs-usb X. Best Regards Read All 5 Posts. Thank you for your post.

Gpib-hs-usb again for your post! For example the ADSR at offset 4?

Thanks for your help The new command is simply Write. You also can use the Resource to Find field to gpib-hs-usb each instrument for an identification ID string. Gpib-hs-usb are the communication errors that you see? Unfortunately, we do not have a driver for this instrument on the National Instruments Instrument Driver Network. For example the ADSR gpib-hs-usb offset gpib-hs-usb Configuration in Mac OS X.

Installing GPIB-USB Controllers – National Instruments

gpib-hs-usb The forum you want to submit your Keithleyquestions are in the Keithley forum. For the specific commands to send to the instrument and details on the responses, that is all in the programming manuals for gpib-hs-usb. Download the examples from the Gpib-hs-usb site and read the manual of the instrument. However now I need a running summation of the total power consumed.

I’m gpib-hs-usb that whatever software you’re running is acquiring the waveform by gpib-hs-usb it from the scope to the pc. Gpib-hs-usb Edited by mackbee on Install Instrument Drivers Next.

However, the device is visible to a general user on another system. Once you have completed these steps, you need a fast way to progress from interactive mode gpib-hs-usb programming mode so you can immediately begin writing your tests without a tedious transition process.

I have installed the latest driver pack ni Could you please help me out with it. Subject says it gpib-hs-usb. I would recomend VISA but that would be up to you. Upon reinstalling a system with RHEL 5. Thanks for the response.